The chemical composition of the www.selleckchem.com/products/E7080.html support is also important as virtually the number of polymeric platforms is unlimited, ranging from CP673451 mouse natural to synthetic ones. Homopolymers,
copolymers, and block polymers can be synthesized from several monomers and monomer mixtures of different natures. In addition, polymer chain length and numerous combinations of monomers constituting the polymeric supports could be tuned in order to optimize the final polymeric material architecture and its performances. Another reason for the rush in designing polymeric platforms for anchoring nanoparticles is the ease of preparation via AZD5582 mw well-established chemical , electrochemical , and radiation-induced routes [2, 11, 12].The aim of this work was immobilization of AgNPs on a flexible substrate (polyethylene terephthalate (PET)). Such nanostructured surface could find application in, e.g., medicine as a surface with antimicrobial properties. Antibacterial behavior is of interest of our future studies. Two slightly different techniques were used for coating of PET surface with AgNPs. In the first
procedure (A), the AgNPs were deposited on PET, beforehand grafted with biphenyl-4,4′-dithiol (BPD), and (B) in the second one, the silver nanoparticles (AgNP*), first coated with
BPD, were deposited-grafted onto the plasma-treated PET (see Figure 1). Figure 1 Scheme of PET modification. (A) Plasma treatment, grafting with dithiol (-SH) and then with silver nanoparticles (AgNP). (B) Plasma treatment, grafting with silver nanoparticles in LY294002 advance coated with dithiol (AgNP*). Methods Materials and modification Biaxially oriented polyethylene terephthalate (PET, density 1.3 g cm-3, 23-μm foil, supplied by Goodfellow Ltd., Huntingdon, UK) was used in this study. The samples were treated in Ar+ plasma on a Balzers SCD 050 device: the exposure time was 120 s, and the discharge power was 8.3 W. The plasma treatment was accomplished at room temperature. More detailed description of the plasma modification can be found in . Immediately after the plasma treatment, the samples were inserted into a methanol solution of biphenyl-4,4′-dithiol (BPD, 4.10-3 mol l-1). Silver nanoparticles (AgNPs) were obtained using a similar process of AgNO3 reduction to that reported by Smith et al. . Thiols are expected to be fixed via one of their functional -SH group to reactive sites created by the plasma-activated polymer surface . The remaining ‘free’ -SH group is then allowed to interact with AgNPs .